Stamped concrete installation
Stamped Concrete in Colorado Springs, CO
Slate, stone or wood plank texture, poured and finished by one crew. Criz's Concrete & Landscaping builds stamped and stained patios that handle Pikes Peak region sun, snow and freeze-thaw.
Serving Colorado Springs, Woodland Park, Divide, Canon City, Pueblo County, Parker, Elizabeth, Limon and Denver.
Stamped and stained patio under a log-home deck, one of our own jobs.
Slate texture on a dark stamped patio.
What you are actually getting
Concrete that looks like stone, built like a slab
Stamped concrete is regular poured concrete that is colored and pressed with texture mats while it is still workable, so a slab can read as slate, stone or wood plank. In Colorado Springs it suits patios, porch landings and walkways where you want the look of natural material with a continuous, jointed slab underneath. The base prep, forms, reinforcement and slope are the same as any good patio. What changes is the finish stage: color goes in or on, the texture is pressed at the right moment, and the surface is cured and then sealed, which is standard for stamped work. Front Range freeze-thaw cycles, strong UV and de-icing salts are hard on any surface, so we talk through color, pattern and upkeep with you before the pour, and we confirm the right spec for your site.
New-build backyards here often start as bare, graded dirt. Older stucco homes may have a cracked pad you want to replace. Either way, a stamped patio is a planned finish, not an add-on, and the planning is where it is won.
- Pattern and textureStone, slate or wood plank look
- Color methodIntegral, hardener or stain
- Joint layoutWhere the saw cuts fall in the pattern
- Sealer and sheenHow it will look and wear
Stamped vs broom finish
Which finish fits your patio?
Most of the patios we pour have a broom finish: a plain gray slab with crisp saw-cut joints and a fine texture for grip. Stamped concrete is the step up when you want the surface to be part of the design. Here is how the two compare in plain terms.
| Compare | Broom finish | Stamped and colored |
|---|---|---|
| Look | Clean, plain and modern. Light gray concrete with a fine ribbed texture and saw-cut joints. | Reads as slate, stone or wood plank, in a color you choose. The surface is the feature. |
| Traction | The brushed texture gives dependable grip, wet or dry. | Textured, but a glossy sealer can get slick when wet. Ask us about a slip-resistant finish. |
| Maintenance | Sweep and rinse. Easy to live with. | Sweep and rinse too, plus a resealing routine to keep color rich and the surface protected. |
| Sealing | Optional for many patios. | Part of the system. Sealer protects the color and the texture, and gets refreshed over time. |
| Cost drivers | Square footage, base prep, thickness, reinforcement, curves and access. | All of that, plus pattern, color method, extra finishing labor and sealer. We price it after seeing your site. |
Broom finish shown above: a new patio with saw-cut squares. Details vary by job, and we confirm the spec on site.
Pattern and color
Choices to talk through before the pour
We do not hand you a catalog and walk away. We look at your house, your yard and how you use it, then talk through the options below until the plan feels right. Colors and textures photograph differently from how they look in your own light, so we like to settle on a direction on site.
Pattern looks
Stone
Irregular natural-stone shapes that suit curved patios and foothills lots with red rock nearby.
Slate
Fine, layered texture with a darker, cleaner feel. Like the dark patio in our photos.
Wood plank
Long board lines with grain, for the look of decking without the upkeep of wood.
Ways to add color
Integral color
Pigment mixed through the concrete, so the color runs all the way through the slab.
Color hardener
Pigmented powder worked into the top of the fresh surface for a deeper, richer tone.
Stain
Applied after the pour to add depth and variation, the way the rust-brown patio above reads.
Colorado care
Keeping stamped concrete looking good here
Colorado Springs is hard on outdoor concrete: big temperature swings, strong high-altitude sun, sudden spring snow and salt on the walks. A few habits go a long way.
Sealer
Sealer protects color and texture. Plan to refresh it over time, more often on surfaces that get full sun.
De-icing salts
Salt and ice melt can damage sealed and colored surfaces. Shovel first, and ask us what to use on yours.
Freeze-thaw
Water that sits and freezes is the enemy. Proper slope and joints at the pour keep it moving off the surface.
Sun and UV
Intense UV can fade color and dull a sealed surface. Light cleaning and a fresh coat keep it even.
Related concrete work
Patio Design & InstallationPlain broom-finish patios and curved extensions
Concrete RepairReplacing cracked slabs and driveways
Stair Design & InstallationFloating steps, round steps and porch stairs
See more finished jobs on our Our Work page.
Stamped concrete FAQ
Questions we hear before the pour
Straight answers for Colorado Springs homeowners. Your site decides the final details, so we confirm them at the estimate.
What affects the cost of stamped concrete?
Size is the biggest driver, then base prep, thickness and reinforcement, curves, access for equipment, and the pattern and color method you pick. Stamping adds finishing labor and sealer on top of a standard patio. We price it after seeing your yard, so the number matches your actual job.
How is a stamped patio installed?
We prepare and compact the base, set forms and reinforcement, then pour. Color goes in or on, and texture mats are pressed into the surface at the right time. Control joints are cut, the slab cures, and it is sealed. Each step depends on the one before it, which is why the timing matters.
Do you install stamped concrete outside Colorado Springs?
Yes. We work in Colorado Springs, Woodland Park, Divide, Canon City, Pueblo County, Parker, Elizabeth, Limon and Denver. Mountain lots up Ute Pass and acreage out east have different access and soil conditions than a city backyard, so we look at the site before quoting.
How long does a stamped concrete job take?
It depends on the size, the pattern and the weather. Forming and base work come first, the pour and stamping happen in one carefully timed session, and the slab then needs time to cure before sealing and use. We give you a realistic schedule at the estimate, and weather can shift it.
Is stamped concrete slippery when wet?
It can be, mostly because of the sealer. Texture helps with grip, but a high-gloss sealer on a wet or icy surface is slicker than a broom finish. If safety matters on your patio or steps, tell us up front and we will talk through a finish that suits how you use it.
Should I choose stamped or broom-finish concrete?
Choose broom finish for a simple, durable patio at a lower cost and easy upkeep. Choose stamped if you want the surface to look like stone, slate or wood and you are fine with resealing it over time. We are happy to price both so you can compare.
Planning a stamped patio?
Tell us about your yard in Colorado Springs or the surrounding area.